Manufacturer: Advanced Micro Devices, Inc.Ĭhip type: AMD Radeon Graphics Processor (0圆758)ĭevice Key: Enum\PCI\VEN_1002&DEV_6758&SUBSYS_00121028&REV_00ĭriver Name: aticf圆4.dll,aticf圆4.dll,aticf圆4.dll,aticfx32,aticfx32,aticfx32,atiumd64.dll,atidx圆4.dll,atidx圆4.dll,atiumdag,atidxx32,atidxx32,atiumdva,atiumd6a.cap,atitmm64.dllįeature Levels: 11.0,10.1,10.0,9.3,9.2,9.1ĭriver Date/Size: 01:52:06, 1120768 bytesĭevice Identifier: : Format(In/Out)=(S342,UNKNOWN) Frames(Prev/Fwd/Back)=(0,0,0) Caps=ĭescription: Realtek Digital Output (Realtek High Definition Audio) Page File: 3393MB used, 15021MB available But for the one with native HDMI you can just plug it straight into the card. The simplest (but not the least expensive) way would be to plug them all into a MSP DisplayPort 1.2 hub and connect each monitor to the hub via a converter cable from the native input format to DP. Question 2: You aren't trying to put these cards in any kind of crossfire mode, right? You do realize that on Linux there is absolutely no support for multiple graphics cards operating at the same time on the same display server, so any effort to use all 3 cards would require using three separate X servers.Īnyway, regardless of your monitors, you can buy connectors/converters/cables until you're blue in the face and eventually get all of them running. In theory both sholuld be able to support the same number of monitors, but in practice fglrx is more likely to result in success - especially for the HD6950, which is a generation newer than the more-tested HD5000 series which works well on the radeon driver. Question 1: Are you using fglrx or are you using radeon? fglrx is the proprietary (closed-source) driver and radeon is the open source graphics driver.
Assuming "6950", "5830" and "5850" refer to models of the AMD Radeon HD series of graphics cards.
0 kommentar(er)
